Search For:

  • Use commas to separate words/phrases
    e.g.: gold drill equipment, drilling equipment

Search In:

Search Sectors:

View this profile in: Français
Company:
Kontek Ecology Systems Inc.
Website:
Location:
  • 1-3250 Harvester Rd
  • BURLINGTON, ON
  • L7N3W9

Contact Information

Telephone:
905-332-8366
Alternate Telephone:
877-332-8366
Fax:
905-332-8367
Email:
info@kontekecology.com
Markets:
Argentina, Australia, Brazil, Japan, Mexico, New Zealand, Peru, Philippines, Russian Federation, Sweden, United Arab Emirates, United Kingdom, United States, Venezuela, Bolivarian Republic of, Viet Nam
Number of Employees:
11-100
Year Established:
1980-06-01
Industries Classification:
333310  Commercial and Service Industry Machinery Manufacturing
541380  Testing Laboratories
541620  Environmental Consulting Services
333299  All Other Industrial Machinery Manufacturing
Total Sales ($CDN):
$10,000,000 to $24,999,999
Updated on:
2015-05-29,  Industry Canada
You must have a valid Industry Canada username and password to modify your company information.
Update Profile
Kontek Ecology Systems Inc.

Company Profile

Kontek Energy Systems Inc. was originally founded in 1980, and at the time primarily serviced the plating industry within the metal finishing sector. Our main operating intention was and still remains to provide economical solutions for our customer's environmental objectives. Kontek's continual growth and expansion allow us to furnish state- of-the-art design and in-house fabrication of industrial wastewater management systems to provide effluent compliance, metals recovery, waste minimization and closed loop water recycling. To meet all of the environmental objectives of our customers, Kontek utilizes physical and chemical processes including: -Precipitation Settling -Oxidation Reduction -Filtration -Absorption -Membrane Separations -Evaporation -Ion Exchange -Electrowinning To support our customers environmental objectives Kontek provides analytical laboratory services and comprehensive service contracts for periodic maintenance and operator training. Kontek installations can now be found in the following markets: -Electroplating -Chemical Process Industries -Metal Finishing -Paperboard -Printed Circuit Board -Nuclear -Aerospace -Groundwater Remediation Kontek wastewater systems are designed with the understanding of both your equipment and process chemistry requirements. Our management staff have years of direct experience in the chemical cleaning, electroplating, and phosphate industries. Environmental Profile Kontek provides state-of-the-art design and fabrication of industrial wastewater management systems to provide effluent compliance, metals recovery, waste minimization and closed loop water recycling. To meet all of the environmental objectives of our customers, Kontek utilizes physical and chemical processes including; precipitation settling, oxidation/reduction, filtration, adsorption, membrane separations, evaporation, ion exchange, electrowinning. To support our customers environmental objectives Kontek provides analytical laboratory services and comprehensive service contracts for periodic maintenance and operator training. Kontek installations can now be found in the following markets; electroplating, chemical process industries, metal finishing, paperboard, printed circuit board, nuclear, aerospace, groundwater remediation. Kontek wastewater systems are designed with the understanding of both your equipment and process chemistry requirements. Our management staff have years of direct experience in the chemical cleaning electroplating, and phosphate industries. Geographic Marketing Activities:Canada: primarily Ontario, Québec and Manitoba United States Great Britain Sweden, through a new potential distributor. Alliances and Contacts Sought Distributors.

Products/Services

  • WASTE WATER TREATMENT EQUIPMENT SUPPLY WASTE WATER TREATMENT EQUIPMENT

  • MAX-EVAP Atmospheric Evaporator and Pulse Spray Counterflow Rinsing In most plating plants, drag-out constitutes the single, greatest expense with regards to chemical consumption and waste-treatment costs. Most plating companies today employ a drag-out tank after the plating tank in an attempt to recover as many chemicals as possible but, while certainly worth while, a drag-out tank normally falls far short of achieving total recovery. In order to "close the loop" by returning all of the dragged-out chemicals to the plating bath, the simplest approach is to have enough evaporation from the plating bath to equal the amount of water being used for rinsing. However, it is very unusual for this to be a normal situation in a typical plating line. The answer is quite simple - increase the rate of evaporation from the plating tank and/or reduce the amount of water being used for rinsing. The MAX-EVAP and the Pulse Spray Counterflow Rinsing - Maxi-Spray systems let a company accomplish both increased evaporation and reduced rinsewater water requirements. The MAX-EVAP Atmospheric Evaporator dramatically increases the normal rate of evaporation from a process solution to create "headroom" in the plating bath which can then be made up from the drag-out tank, thereby returning the dragged out chemicals to the plating bath. To "close the loop" a Pulse Spray Counterflow Rinsing - Maxi-Spray technique is utilized. The technique is low-cost, air-operated pump and spray assembly to counterflow rinsewater (with its dragged-out chemicals) back to the plating tank. The Maxi-Spray air pump is activated as the work bar or rack starts its "up cycle" from the previous tank and sprays only until the top of the "up cycle" is reached. At this point spraying is stopped until the next lift cycle of the bar or rack. Spraying is carried out only on the "up cycle". Chemicals are therefore retained in their respective tanks and drag-out from one tank to the next is significantly reduced. Therefore, if less chemical is being dragged-out, less water is required to maintain the same quality of rinsing in subsequent tanks. The MAX-EVAP Atmospheric Evaporator and Pulse Spray Counterflow Rinsing offer 100% recycling of dragged-out process chemicals, reduced water consumption and lower waste-treatment requirements.

  • MEMKON MicroFiltration Clarification & Recovery of Industrial Wastewater Many manufacturing and metal finishers treat their metal bearing rinse waters through conventional treatment with a gravity plate settler. However conventional treatment can yield inconsistent metal discharge results. Microfiltration process effluent with proper pre-treatment including coagulant additions yields very consistent metal discharge numbers due to the nominal 0.1 micron rating that only allows particulate matter less than 0.1 to pass through the microfilter membranes. The net result is a greater ability to meet ever-tightening metal discharge limits. Furthermore, facilities utilize this technology as a pre-cursor for water recycle through reverse osmosis. MEMKON MF Membrane Features: 1. Membranes are of a moulded design, unlike others which are rolled from flat sheet into a tube which then has a lengthwise seam, and thus a weak spot. 2. Membranes are moulded from high purity sintered polyethylene, and have the capability of retaining all initial properties even after immersion into bleach for a one year period. Competitor’s membranes typically become brittle after about 30 days of immersion in bleach. Bleach is a very commonly used cleaning agent, so corrosion resistance is very important. 3. Membranes have tube walls that are 25-30% thicker and thus stronger and more robust, than the competitor’s. 4. 100% of their membranes are tested using an iron solution that is very colloidal. Colloids are large but soft and spongy masses that will pass through most membranes. Duraflow quality testing will reject any membranes that pass any of the colloidal iron through the membrane.

  • Environmental Products and Services

Back to Top